Engineers who develop fundamental models for chemical processes are often unable to estimate all of the model parameters due to problems with parameter identifiability and estimability. The literature concerning these two concepts is reviewed and techniques for assessing parameter identifiability and estimability in nonlinear dynamic models are summarized. Modellers often face estimability problems when the available data are limited or noisy. In this situation, modellers must decide whether to conduct new experiments, change the model structure, or to estimate only a subset of the parameters and leave others at fixed values. Estimating only a subset of important model parameters is a technique often used by modellers who face estimability problems and it may lead to better model predictions with lower mean squared error (MSE) than the full model with all parameters estimated. Different methods in the literature for parameter subset selection are discussed and compared.
An orthogonalization algorithm combined with a recent MSE-based criterion has been used successfully to rank parameters from most to least estimable and to determine the parameter subset that should be estimated to obtain the best predictions. In this work, this strategy is applied to a batch reactor model using additional data and results are compared with computationally-expensive leave-one-out cross-validation. A new simultaneous ranking and selection technique based on this MSE criterion is also described. Unfortunately, results from these parameter selection techniques are sensitive to the initial parameter values and the uncertainty factors used to calculate sensitivity coefficients. A robustness test is proposed and applied to assess the sensitivity of the selected parameter subset to the initial parameter guesses. The selected parameter subsets are compared with those selected using another MSE-based method proposed by Chu et al. (2009). The computational efforts of these methods are compared and recommendations are provided to modellers. / Thesis (Master, Chemical Engineering) -- Queen's University, 2011-09-27 10:52:31.588
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OKQ.1974/6757 |
| Date | 27 September 2011 |
| Creators | McLean, Kevin |
| Contributors | Queen's University (Kingston, Ont.). Theses (Queen's University (Kingston, Ont.)) |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English, English |
| Detected Language | English |
| Type | Thesis |
| Rights | This publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner. |
| Relation | Canadian theses |
Page generated in 0.0117 seconds