This master thesis deals with a study of directional antennas, followed by their design and optimization of horn antenna based on SIW for Ka band (26,5- 40 GHz). The first part of the thesis contains the theoretical analysis of the different types of directional antennas, also the SIW technology is described here. It also describes the 3D printing technology by means of which the final antenna should be made. The next part of this work is about design of horn antenna based on SIW. Simulation and optimization of the antenna will be done using the CST Microwave Studio. The horn antenna was modeled with three different dielectric loads. The horn antenna with an experimental triangular dielectric load was chosen for fabrication. The fabricated antenna has reached almost the whole bandwidth to cover Ka. The antenna gain was 9,38 dBi for 33 GHz frequency.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:403773 |
| Date | January 2019 |
| Creators | Dvořák, Václav |
| Contributors | Horák, Jiří, Láčík, Jaroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds