Return to search

Efficient Decoding Algorithms for Low-Density Parity-Check Codes / Effektiva avkodningsalgoritmer för low density parity check-koder

<p>Low-density parity-check codes have recently received much attention because of their excellent performance and the availability of a simple iterative decoder. The decoder, however, requires large amounts of memory, which causes problems with memory consumption. </p><p>We investigate a new decoding scheme for low density parity check codes to address this problem. The basic idea is to define a reliability measure and a threshold, and stop updating the messages for a bit whenever its reliability is higher than the threshold. We also consider some modifications to this scheme, including a dynamic threshold more suitable for codes with cycles, and a scheme with soft thresholds which allow the possibility of removing a decision which have proved wrong. </p><p>By exploiting the bits different rates of convergence we are able to achieve an efficiency of up to 50% at a bit error rate of less than 10^-5. The efficiency should roughly correspond to the power consumption of a hardware implementation of the algorithm.</p>

Identiferoai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-2794
Date January 2005
CreatorsBlad, Anton
PublisherLinköping University, Department of Electrical Engineering, Institutionen för systemteknik
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, text

Page generated in 0.0016 seconds