Two-phase flow in porous media is an important subsurface process that has significant impacts on the global economy and environments. To study two-phase system in porous media, capillary pressure (Pc ), relative permeability (Kr), bulk electrical conductivity (σb) and bulk relative permittivity (εb) are often employed as characterization parameters. Interestingly, all of these parameters are functions of water saturation (S). However, the non-uniqueness in the Pc -S, Kr-S,σb-S and εb-S relationships pose considerable challenges in employing them for effective monitoring and control of the two-phase flow processes. In this work, laboratory scale experiments and numerical simulations were conducted to investigate the factors and conditions contributing to the non-uniqueness in the above relationships for silicone oil-water and supercritical CO2-water flow in porous media, with a special emphasis on geological carbon sequestration. Specifically, the dynamic capillary pressure effect, which indicates the dependence of the Pc - S relationship on the rate of change of saturation (αS/αt) during two-phase flow in porous media was investigated. Using a silicone oil-water system, the dynamic capillary pressure effect was quantified in term of the parameter named the dynamic coefficient, τ , and it was found to be dependent on the domain scale and the viscosity ratio of the two fluids. It was found that τ increases with the domain scale and the viscosity ratio. It is inversely affected by αS αt , which is related to the degree of resistance to the fluid motion, namely, viscosity. In almost all cases, τ was found to decrease monotonically with an increase in water saturation, S. An order increase in magnitude of τ was observed as the domain scale increases from 4cm scale to 8cm in height. A similar order of increase in τ was observed in the 12cm high domain scale. There is an order increase in the value of τ for the silicone oilwater system as the viscosity ratio increases from 200 to 500. For the supercritical CO2 (scCO2) and water system in porous media, the experiments and numerical simulations showed that τ increases with rising system temperature and decreasing porous media permeability. Dimensionless analysis of the silicone oil-water experimental results showed that by constructing non-dimensional groups of quantities expressing a relationship among different variables on which τ depends, it is possible to summarise the experimental results and determine their functional relationship. A generalised scaling relationship for τ was derived from the dimensionless analysis which was then validated against independent literature data. The exercise showed that the τ-S relationship obtained from the literature and the ii scaling relationship match reasonably well. This work also demonstrated the applicability of an artificial neural network (ANN) as an alternative computational platform for the prediction of the domain scale dependence of τ . The dependence of the Kr-S relationship on αS/αt was also investigated. The results showed that the Kr-S curve under dynamic flow condition is different from that under the quasi-static condition. Kr for water (Krw) increases with increasing water saturation and decreases with the increase in viscosity ratio while Kr for silicone oil (Krnw) increases with decreasing water saturation as well as with the increase in viscosity ratio. Also, Krw decreases while Krnw increases with the increasing boundary pressure. However, the εb-S and σb-S relationships were found to be independent of αS/αt for the scCO2-water system in carbonate and silicate porous media. Nevertheless, the εb and σb values decrease as the water saturation decreases in the two porous media samples. While εb decreases with increase in temperature in silica sand, the trend in the limestone showed a slight increase with temperature, especially at high water saturation. Also, the εb-S relationship is shown to be affected by pressure in silica sand increasing with the pressure of the domain. On the contrary, the σb-S relationship increases as the temperature increases with more significance at higher water saturation in the silica sand sample. This work further demonstrated the application of a membrane in the monitoring of the CO2 in geological sites used for carbon sequestration. Commercial silicone rubber coupled with a pressure transducer showed potential in the detection of CO2 leakage from geological sites. The response of the device in terms of the mass of permeated gas, permeability and gas flux were investigated for both CO2 and N2. In addition, the monitoring of potable water contamination in a shallow aquifer by the migrating or leaking of CO2 is demonstrated with the combination of the pH analysis, geoelectrical measurement techniques and the membrane-sensor system. Overall, the work in this PhD research demonstrated robust applications of two-phase systems'characterization parameters under different scenarios in the porous media. Implications of the findings in this work to the monitoring and control of two-phase systems in porous media are expatiated.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:697650 |
| Date | January 2014 |
| Creators | Abidoye, Luqman K. |
| Publisher | Loughborough University |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | https://dspace.lboro.ac.uk/2134/16341 |
Page generated in 0.0023 seconds