This master‘s thesis deals with optimization of cutting conditions when machining of precise parts in mass production. In experimental part of this thesis is a comparison of the roughing tool with indexable cutting inserts with the new implemented milling cutter. Tool wear of both roughing tools has been analysed. The surface roughness analysis after machining with the face milling cutter was performed. The output of this work is to obtain optimal cutting conditions to gain a minimum surface roughness.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:444295 |
| Date | January 2021 |
| Creators | Kolomý, Štěpán |
| Contributors | Sedlák, Josef, Píška, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds