<p> The effect of strain hardening rate and material strength on the development of surface
roughness in AA6111 was investigated. No measurable change in the rate of roughening,
or in the surface morphology was observed due to altering the strain hardening rate
by using different test temperatures. Changing the material strength and strain hardening
rate by altering the precipitation state also gave no significant change in either roughening
rate or morphology with respect to strain. The development of surface roughness is also
independent of strain history. Samples subjected to an intermediate polish after 20% true
strain resumed roughening at the same rate regardless of amount of previous tensile strain.
The development of surface roughness is dependent on only the strain level to which the
sheet is deformed. The surface morphology seems to be controlled by the combination
and distribution of texture components on the surface. The rate of roughening is grain size
dependent and the surface grain size may provide a key to controlling roughening. </p> / Thesis / Master of Applied Science (MASc)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/21868 |
| Date | 23 September 2005 |
| Creators | Oswell, Victoria |
| Contributors | Wilkinson, D. S., Embury, J. D., Electrical and Computer Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
Page generated in 0.0017 seconds