This master’s thesis deals with the use of a coordinate measuring machine probe for surface texture evaluation. The thesis’ goals were to describe the Renishaw’s SFP2 probe, to analyze the measurement system of the probe and a common stylus instrument, to carry out a demonstrative measurement, to analyze measurement results and to give practical recommendations. The measurement system analysis of the SFP2 consists in the evaluation of minimal specification limits of selected roughness parameters, for which gauge capability can be proven. The analysis results are compared with the results of the measurement system analysis of the Surtronic 25 profilometer. The differences in the measuring processes of mentioned devices are demonstrated by surface texture inspection of torque converter body. For the measurement result analysis, uncertainties in the selected surface texture parameters are calculated in two ways. Finally, recommendations for the producer of the probe and for its users are worked out. The results of this thesis may contribute to a wider use of a coordinate measuring machines for surface quality evaluation.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:378396 |
| Date | January 2018 |
| Creators | Vančurová, Martina |
| Contributors | Šrámek, Jan, Harčarík, Matej |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds