Return to search

Příspěvek k realizaci nákladově a energeticky úsporných rodinných domů / Contribution to the construction of cost and energy efficient family houses

Dissertation focuses on the verification of construction family houses made of concrete shell block with internal thermal insulation system. The construction technology is transferred to the Czech Republic from France. The work focuses on building envelope. The suitability of implementation is assessed on the basis of verification selected thermal technical requirements placed on building envelope. Requirements are specified by legislation in force in the ČR. The verification was performed by using software simulations and measurements on realized buildings. Critical areas of construction technology were identified on the basis software simulations and measurements on site. It was suggested solution, in which critical areas comply the thermal technical requirements. The building envelope was checked also using the thermography imaging on site. Continuous measurement of interior temperature was used to evaluate thermal comfort in the room. In the completed buildings was tested airtightness of the building envelope, which revealed other critical areas of the building envelope. Critical areas are necessary to solve with sufficient care. The economic cost of implementing each variants of exterior walls made of concrete shell block with internal thermal insulation were compared with the economic costs of implementing external walls made of burnt clay hollow blocks and made of burnt clay hollow blocks with external thermal insulation system ETICS. Subsequently, the economic return was calculated for individual variants of external walls made of concrete shell blocks with internal thermal insulation. From the environmental viewpoint was made comparison of production greenhouse gas CO2 and SO2 (cause acid rains) during the life cycle of the individual variations of exterior walls made of concrete shell blocks with system of internal thermal insulation, exterior walls made of burnt clay hollow blocks and burnt clay hollow blocks with external thermal insulation syst

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233805
CreatorsČech, Josef
ContributorsMohelníková, Jitka, Gašparik,, Jozef, MBA, Pavel Slováček,, Hrazdil, Václav
PublisherVysoké učení technické v Brně. Fakulta stavební
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/doctoralThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0067 seconds