This study focuses on the Kaohsiung industrial pier sediment survey, assessment and feasibility study of the approach. In this study, field monitoring operations, including the close Salt Water River mouth area of the industrial port (area A), the far Salt Water River mouth area of the industrial port (area B) and for the factories and shipyards at the junction of the terminal area (area C), The sampling of sediments of three core and three surface sediments of area A that used as treating test at laboratory.
The survey results show that the industrial pier some heavy metals in the sediment concentration is higher than the quality indicators in the sediment above the limit (ULV), especially copper and zinc. In addition, the concentration of heavy metals of industrial pier area A, B and C of the sediment at least one of them is than current soil control standard. Among them, the frequency of exceeding control standards of copper concentration is the highest, the surface sediments of area A, B and C were about 75%, 42% and 0% respectively, while the core sediments were about 20%, 90% and 15%. These results indicate that the industrial pier sediment required to carry out appropriate pre-treatment to reclamation land to recycling. After investigation, simulation and estimation, the required appropriate treatment sediment in order to landfill volume of industrial pier area A and B (Salt Water River mouth) were approximately 40,000 and 36,400 cubic meters, the total approximately 76,400 cubic meters. Industrial pier is located in the Salt Water River mouth, and therefore withstand the effects of pollutants of the upstream sources flowed in, and than the sediment quality was poor. Sediments were accumulated in the bottom should be removed and sediments at the upstream Salt Water River should be treated too, the remediation and pollution source control for the future to improve the sediment quality is the most important work in Taiwan.
In this study, chemical washing and chemical oxidation of the two treatment technology for industrial pier sediment organic pollutants (total petroleum hydrocarbons (TPH) as the target pollutants) to deal with the feasibility test. Sediment to be processed was collected neart the industrial pier, the pH value of approximately 7.1, the moisture content was 43.9%, 20.1% organic matter content, while the particle size composition of mainly fine particles (silt + clay) to about 84.3% handling may be more difficult. The sediments of the TPH concentration of 8,691 mg / kg. Three surfactants Simple Green (SG), Triton X-100 (TX-100) and Tween 80 (TW80) were used at sediment washing test,washing with 60 pv and 5% (v / v) SG could remove 97.3% TPH at the end of the mud; 0.5% (v / v) TX-100 could remove 96.8% TPH; washing with 30 pv, 1% (v / v) TX-100 could remove 94.6% the TPH; washing with 10 pv, 5% (v / v) TX-100 could remove 96.7% TPH; but TW80 leaching ineffective. Oxidation processing, applied 6% H2O2 reaction 180 min, 58.2% of TPH could be removed. Connection of washing and oxidation treatment process, could be removed total of 86% of TPH. The sediment surface morphology before and after treatment were observed by SEM were not significantly different, no surfactant emulsion was left at sediment after treated, this result revealed the connection of washing and oxidation treatment process could remove most of TPH and less harmful to the environment was an available technique.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0619112-085355 |
| Date | 19 June 2012 |
| Creators | Chen, Chun-Ting |
| Contributors | Jimmy C. M. Kao, Cheng-Di Dong, Ming-Sheng Ko, Yi-Chu Huang, Ting-Nien Wu, Guo-Ping Chang-Chien, Shih-Hsiung Liang |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0619112-085355 |
| Rights | user_define, Copyright information available at source archive |
Page generated in 0.0018 seconds