This thesis presents a novel configuration of battery power by the outputs with serial connection of battery power modules (BPMs) for high voltage level loads. As compared to the conventional application of series-connected battery bank, this configuration operates the BPMs individually, and thus has the advantages of flexible control, convenient maintenance, and easily favorable battery management. The associated converter is equipped to a single battery pack, so that has lower component stresses leading to a higher circuit efficiency.
The operation and the design of a lead-acid battery power with series boost-typed BPMs are illustrated. The operation and the design of the converter are illustrated. The control of the power converters is accomplished by a complex programmable logic device (CPLD). To improve the converter efficiency, the technique of synchronous rectification is introduced. For the BPMs designed for discontinuous conduction mode (DCM) operation, charge equalization can be automatically achieved under the same duty-ratio, but is adequate only for batteries with a small difference. On the other hand, charge equalization for the BPMs with continuous conduction mode (CCM) can easily be accomplished by regulating the duty-ratios of the converters.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0720109-133658 |
| Date | 20 July 2009 |
| Creators | Hu, Jin-shin |
| Contributors | Jiann-Fuh Chen, Chin-Sien Moo, Shiang-Hwua YU, Hau-Chen Yen, Yao-Ching Hsieh |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0720109-133658 |
| Rights | unrestricted, Copyright information available at source archive |
Page generated in 0.0028 seconds