M. Tech. Electrical Engineering. / Discusses that most real-time applications of synchronised phasor measurement units in power system stability studies are done using RTDS simulator, hardware PMUs and PTP hardware modules with GPS providing the time reference. The major drawbacks of this configuration are both technical and economical. The technical limitations are related to the possible number of outputs that can be used to interface PMU devices, which can be very limited; and also the possible limits on small-time step computation due to the big number of output signals. The economic constraints are mainly due to cost: for a research laboratory, only a limited number of units can be acquired due to budgeting issues. To overcome these difficulties, the realisation of an entirely software-based synchrophasor measurement unit, presents an attractive approach. Such a unit will be capable of deliveringreal-time data by acquiring the voltage and current signals from the Matlab/Simulink simulator, low cost software environment PMUs computing real-time phasors of voltage and current and software only PTP synchronisation protocol. The unit delivers synchrophasors for the application of power system SE and small signal stability analysis, but also taking into consideration the accuracy of the synchronisation protocol on the application of power system SE and small signal stability analysis.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:tut/oai:encore.tut.ac.za:d1001015 |
| Date | January 2014 |
| Creators | Ngoma, Louwrance Jack. |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Text |
| Format |
Page generated in 0.0014 seconds