In recent years, hardware-in-the-loop (HIL) simulation has assumed a prominent role
in the vehicle development process. A physical part, which may be a prototype at any stage of development, is tested, while the rest of the vehicle is represented by a mathematical model. Vehicle models used with hardware-in-the-loop must be capable of simulating an event in less time than it takes the event to occur in reality. Fast simulation necessitates
a model that is represented by very efficient simulation code. This thesis presents
a procedure for automatically generating this simulation code, given a description of the
vehicle as input.
For this work, a symbolic formulation procedure based on linear graph theory and
the principle of orthogonality is used to generate governing equations for vehicle systems;
this procedure forms the basis of the DynaFlexPro software package. In order to generate
simulation code for vehicle dynamics studies, the DynaFlexPro component model template
was extended to include rules for calculating intermediate variables and rules for
calling external functions. These changes enabled the development of a tire component
model, known as DynaFlexPro/Tire, that adds critically important (and computationally
efficient) blocks to the overall vehicle simulation code. The combination of DynaFlexPro
and DynaFlexPro/Tire allows analysts to construct a model for any vehicle topology and
gives analysts great freedom to define how tire forces and moments will be calculated.
Simulation code describing the vehicle model is automatically generated using symbolic
computing techniques. The accuracy of the approach was validated by comparing results
for DynaFlexPro vehicle models to results for equivalent models developed in a
well-established tool for vehicle dynamics simulation (MSC.ADAMS).
Two different vehicle models were constructed using DynaFlexPro and DynaFlex-
Pro/Tire: a generic 4-wheeled vehicle with independent suspension and an articulated
forestry skidder. Both models had an open-loop topology. When appropriate modeling
variables were selected, each model was described by a minimal set of ordinary differential
equations (ODEs) and the simulation code generated by DynaFlexPro was capable
of being used for hardware-in-the-loop applications; the braking and handling behavior
of the example models was simulated faster than real-time on a desktop PC with a 3.2
GHz Pentium 4 processor and 1 GB of RAM. For the same vehicle models, a different
choice of modeling variables resulted in a mixed set of differential and algebraic equations
(DAEs); in that case, HIL-capable simulation code could not be consistently generated.
The approach works well for vehicle models described by ODEs, but more research is
needed into the treatment of DAEs for real-time simulation of vehicle dynamics.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OWTU.10012/3002 |
| Date | January 2007 |
| Creators | Morency, Kevin |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Thesis or Dissertation |
| Format | 2322353 bytes, application/pdf |
Page generated in 0.0018 seconds