This diploma thesis deals with computation modeling of spur gearing using FEM. The methodology of checking calculation was suggested for gears which are not possible to check only by using standard ČSN 01 4686. The analysis of influence of vicinity of stress concentration on stress distribution in tooth root was performed. It is possibility to use the gears with thinner rim than the standard ČSN 01 4686 recommends. The main part of this work is devoted to fatigue crack propagation study in gears with thin rim. Aiding T-stress the influence of constraint and stress multiaxiality on crack propagation was taking into account. The predicted fatigue crack propagation paths were compared with certain experimental data. It is demonstrated that the considering of influence of constraint improves estimation of consequent crack propagation direction and in some cases the influence of constraint can significantly change the estimated crack propagation path.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:227992 |
| Date | January 2008 |
| Creators | Ševčík, Martin |
| Contributors | Maňas, Pavel, Vrbka, Martin |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0104 seconds