A common challenge during deposition of slurries is segregation as large particles settle through the matrix of fines and water. Whether segregation occurs or not depends on the grain size distribution of the solids, the void ratio or solids content and the rheological properties of the fines-water matrix.
The rheological characterization of slurry composed of different grain sizes and varying water chemistry was investigated. The vane yield stress was used to characterize different slurries composed of clay, silt and sand materials. Semi-empirical fractal theory showed good agreement with experimental data for fine slurry. Comparison of yield stress at same concentration but different composition showed a decreasing trend as the composition of either silt or sand material increases. The pore-water effect was studied for representative kaolinite slurry. The yield stress was insensitive for pH values in the acidic and neutral range, while in the basic range it showed significant response depending upon the type of the chemical used to achieve the pH: Ca(OH)2 and NaOH.
A modified segmented standpipe was designed and used in a series of experiments to determine concentration profiles during the sedimentation processes. Analyses of the solid content profiles and sand content profiles in the standpipes indicated a capture of sand particles which could be correlated to the yield stress of the fines matrix. Theoretical calculations, however, showed over-prediction of the captured sand size. A correction factor of about 0.2 was applied.
Flume test on a high solid content slurries showed that the dynamic segregation is governed by all the factors governing the static case. Beaching profile shapes were not a necessary indication of segregating and non-segregating type of slurries. Modified version plastic theory for flow slides was used to characterise profile shape.
Computational fluid dynamics approaches based on kinetic theory and bi-viscous model analysis were implemented and showed a reasonable capability in modelling segregation when compared with experimental results. A statistical formulation for segregation index, SI, was proposed. The index accounts for variation in depth of samples. Finally recommendations for future research are proposed based on the observations and findings made from the study. / Geotechnical Engineering
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:AEU.10048/796 |
| Date | 11 1900 |
| Creators | Mihiretu, Yetimgeta |
| Contributors | Chalaturnyk, Rick (Civil and Environmental Engineering), Chalaturnyk, Rick (CIvil and Environmental Engineering), Sego, Dave (Civil and Environmental Engineering), McCaffrey, William (Chemical and Materials Engineering), Driver, Robert (Civil and Environmental Engineering), Yanful, Ernest (External Examiner, University of Western Ontario) |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | 2177381 bytes, application/pdf |
Page generated in 0.0018 seconds