In this paper numerical flow calculations with respect to the annular gaps with added radial grooves normaly used on the spools of directional control valves were carried out. The impact of various annular gap geometries and radial grooves during variable pressure conditions, and while using different hydraulic fluids, on the flows through annular gaps were investigated for different flow regimes. Samples with different geometries and numbers of radial groves on the spool of the directional control valve were also made for the purpose of carrying out flow measurements. The two different hydraulic fluids that were used in the numerical simulations and for the flow measurements were a hydraulic mineral oil and tap water. The results of the numerical calculations for the different models of the radial grooves with axially symmetric geometries show their impact on the internal leakage with respect to three different regimes of flow. The results of the numerical calculations based on the use of a hydraulic oil show a trend that was established by the experimental investigation.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa.de:bsz:14-qucosa-199629 |
| Date | 27 April 2016 |
| Creators | Majdic, Franc |
| Contributors | Dresdner Verein zur Förderung der Fluidtechnik e. V.,, Technische Universität Dresden, Fakultät Maschinenwesen |
| Publisher | Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | doc-type:conferenceObject |
| Format | application/pdf |
| Source | 10th International Fluid Power Conference (10. IFK) March 8 - 10, 2016, Vol. 1, pp. 349-360 |
Page generated in 0.002 seconds