The purpose of this dissertation is to take into consideration the design and the steel structure assessment of the hangar for small propeller aircraft type Cessna. The platform dimensions are 40,0 by 60,0 metres. Headroom is around 10,0 metres. The object’s location is in Brno. The main structural material is steel S355J2. There are two initial geometric alternatives, in other words structural modifications of desired solution. These are spatial truss arc tie beam and garland tie beam. The two alternatives were tentatively designed according to their dimensions and the main supporting elements of both alternatives were also assessed and considered. The alternatives were finally evaluated and one option was selected for detailed processing. In turn of the chosen option, there had been drawing of detailed analysis of the main load bearing parts of the construction with joints and some other details included. Furthermore there is drawing documentation and supervisor’s technical report attached. The valid standards CSN EN were used in processing of this dissertation.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:226908 |
Date | January 2014 |
Creators | Růžičková, Markéta |
Contributors | Pilgr, Milan, Štrba, Michal |
Publisher | Vysoké učení technické v Brně. Fakulta stavební |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds