This research investigated the longitudinal shear transfer mechanism in composite shallow cellular floor beams. The shear transfer mechanism is different with the headed shear studs used in composite construction. The shear resisting properties and behaviour of the shear transfer mechanism has not been studied previously. Experimental and analytical studies were carried out with the aims of improving and optimizing the design details, and advancing the method of shear connection in shallow floor beam construction. The composite shallow cellular floor beam investigated in this research is a new type of beam fabricated by welding two highly asymmetric cellular tees along the web. The shear connections of this type of composite beam are formed by the web openings, which transfer longitudinal shear force. Four types of these shear connections were studied: concrete-infill-only, tie-bar, ducting and web-welded-stud shear connections. In total, 24 push-out tests were performed in two test series to investigate the load-slip behaviour and shear resistance of the shear connections under direct shear force. The failure mechanisms of the two forms of shear connections were extensively studied, which lead to the development of a design method for the composite action. The concrete infill element passing through the web opening is subject to a complex three-dimensional stress state, and it is difficult to analyse it using the mathematical model rather than empirical formula. Finite Element Analysis of the concrete-infill-only shear connection was performed with a parametric study to further verify the design method that has been developed. Two flexural tests were carried out on a full-scale composite shallow cellular floor beam with a solid slab. The shear connections investigated in the flexural tests were: concrete-infill-only and tie-bar shear connections passed through the web. The behaviour and performance of the shear connections in the flexural tests were compared with those in the push-out tests. The degree of shear connection of the two flexural tests was determined in the back analysis using plastic theory with measured material properties. Based on the findings of the push-out tests and flexural tests, two design methods of deflection check and moment resistance were developed for composite shallow cellular floor beams at the serviceability limit state and the ultimate limit state respectively. The deflection check design method is based on the uncracked section properties of the composite beam. The moment resistance design method developed in this thesis is compatible with the design methods of BS5950 and Eurocode 4 (EC4).
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:560958 |
| Date | January 2012 |
| Creators | Huo, Bingyu |
| Publisher | City University London |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://openaccess.city.ac.uk/1965/ |
Page generated in 0.0017 seconds