Return to search

Příprava a vlastnosti moderních magnetoelektrických a multiferoických keramických materiálů / Processing and properties of novel magnetoelectric and multiferroic ceramic materials

A literature review on the topic of ferroic and multiferroic solid solutions of BaTiO3, SrTiO3 and EuTiO3 forms the first part of this master thesis. The second part describes the experimental preparation and evaluation of the properties of samples of europium strontium titanates - EuxSr1-xTiO3. First, the high temperature solid state synthesis was carried out and relative density and open porosity of the sintered samples were evaluated. The sintered samples showed open porosity higher than 10%. The reasons for this behavior were evaluated and described from the point of view of experimental conditions and thermodynamical calculations. Finally, electric and dielectric properties of selected samples were measured. These results show that these samples are insulators and their residual conductivity is caused probably by oxygen vacancies, arising from the synthesis in a strongly reducing atmosphere of pure hydrogen.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230934
Date January 2013
CreatorsOsička, Luděk
ContributorsPouchlý, Václav, Maca, Karel
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0014 seconds