There is growing interest in the development of fabrication techniques to cost effectively mass-produce high-resolution (micro/nano) 3D structures in a range of materials. Biomedical applications are particularly significant. This work demonstrates a novel technique to simultaneously fabricate a sacrificial mould having the inverse shape of the desired device structure and also create the desired device structure using electroplating deposition techniques. The mould is constructed of many thin layers using a photoresist material that is dissolvable and sensitive to UV light. At the same time the device is created in the emerging mould layers using Gold electroplating deposition technique. Choosing to fabricate the mould and the 3D structures in multiple thin layers allows the use of UV light and permits the potential cost-effective realization of 3D curved surfaces, the accuracy and geometric details of which are related to the number of layers used. In this work I present a novel idea to improve the LIGA process when using many masks to deposit multi thin layer over each other. Moreover, this technique can be utilized to produce a curved surface in the vertical direction with any diameter. Practically, a 2 µm thickness of layer is applied in the proposed technique. However, a layer of 0.5 µm or less can be deposited. An example is provided to explain the novel fabrication process and to outline the resulting design and fabrication constraints. With this technique, any structure could be made and any material used. The work employs conventional techniques to produce a 3D complex shape. By using conventional techniques with multi layers to produce a 3D structure, many problems are expected to occur during the process. Those problems were mentioned by many researchers in general but have not been addressed correctly. Most researchers have covered those problems by leaving the conventional and using a new technique they invented to produce the required product. However, in my work I have addressed those problems for the first time and I offered a new and effective technique to improve the MEMS technology and make this technology cheaper. This was achieved by using a research methodology requiring a rigorous review of existing processes, as outlined above, then by proposing a concept design for an improved process. This novel proposed process was then tested and validated by a series of experiments involving the manufacture of demo-devices. The conclusion is that this new process has the potential to be developed into a commercially implementable process.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:529137 |
| Date | January 2011 |
| Creators | Kriama, Abdulbast |
| Publisher | University of Glasgow |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://theses.gla.ac.uk/2405/ |
Page generated in 0.0016 seconds