The aim of this thesis work is to design and manufacture a Dissimilar Channel Angular Pressing (DCAP) system for severe plastic deformation of aluminum alloy sheets in order to obtain ultra-fine grained structure. First, a DCAP system was designed by Finite Element Analysis and constructed after various optimization trials. Next, 6061-T0 aluminum alloy plates were severely deformed by various DCAP passes through the system. The samples were characterized by metallography, X-ray diffraction, tension and hardness tests. It has been observed that the yield strength was improved about 100 % after 2 DCAP passes, and 45 nm sub-grain size was obtained.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/3/12610609/index.pdf |
| Date | 01 June 2009 |
| Creators | Uzuncakmak, Gokturk Emre |
| Contributors | Gur, Cemil Hakan |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | M.S. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for public access |
Page generated in 0.0017 seconds