Aluminum based alloys have wide area of usage in automotive and defense industry and bending processes are frequently applied during production. One of the most important design criteria of bending processes is springback, which can be basically defined as elastic recovery of the part during unloading. To overcome this problem, heat treatment is generally applied to the workpiece material to refine tensile properties.
In this study, the effect of heat treatment on springback characteristics of aluminum studied both numerically by using finite element analysis and experimentally. For this purpose, two different materials are selected and various heat treatment procedures are considered. The aluminum sheets having thickness of 1.6 mm, 2 mm and 2.5 mm are bent to 60& / #730 / , 90& / #730 / and 120& / #730 / . The von Mises stress distributions, plastic strain values and punch load values and comparison of the numerical and experimental results are also given.
Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12610182/index.pdf |
Date | 01 November 2008 |
Creators | Sarikaya, Onur Turgay |
Contributors | Darendeliler, Haluk |
Publisher | METU |
Source Sets | Middle East Technical Univ. |
Language | English |
Detected Language | English |
Type | M.S. Thesis |
Format | text/pdf |
Rights | To liberate the content for public access |
Page generated in 0.0016 seconds