Autoclaved aerated concrete is a used building material, especially for its thermal insulating properties. During autoclaving, an aerated concrete microstructure produces crystalline CSH phases, primarily tobermorite. The ingoing substances are calcium oxide and silica. In addition to commonly used raw materials, secondary raw materials rich in silicon dioxide can be used for production. The use of secondary raw materials gives the opportunity for the construction industry to be more environmentally friendly. Another benefit is the reduction of financial costs. The work explores the influence of individual secondary raw materials on the microstructure. High-temperature fly ash, fluid fly ash, cinder, ground glass and zeolite were used The raw materials were mixed with unalloyed lime at a molar ratio of calcium oxide to silicon dioxide of 0.73 and 1.0. Autoclaving capsules were used to synthesize tobermorite under laboratory conditions. Autoclave was performed at 170 °C and 190 °C with hydrothermal durations of 4, 8 and 16 hours. The most important influence on the microstructure was high-temperature fly ash, on the contrary, the greatest influence on the mechanical properties is attributed to the ground glass.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:372320 |
| Date | January 2018 |
| Creators | Martanová, Jana |
| Contributors | Suchý, Peter, Kulísek, Karel |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0025 seconds