Return to search

Contaminant issues in production and application of biochar

For widespread use of biochar in agriculture and horticulture, it must be ensured that application will neither adversely affect soil and plants, nor exceed legislated contaminant concentrations. The most relevant groups of contaminants in biochar are potentially toxic elements (PTEs), polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOC). In this thesis, the concentrations of these groups of contaminants were analysed in 90 different biochars produced by slow pyrolysis. Subsequently, the concentrations were compared to legislation/guideline threshold values and linked to production conditions. The risk these contaminants pose to plant growth was also assessed, to give recommendations on production of safe biochar. PTEs can neither be formed nor destroyed, which means their presence in biochar is predominantly determined by feedstock type. However, significant levels of Cr, Fe and Ni were introduced into biochar from the furnace steel, whilst PTEs with low boiling points, such as As, Cd and Zn, partially evaporated during pyrolysis. PTEs were not responsible for phytotoxic effects observed for PTE-rich biochars despite biochar’s exceedance of available and total PTE threshold values for soil and soil amendments. Although initial tests were promising, the risk that PTE-rich biochars as amendment for soil and growing media pose, needs further investigation. The PAH concentration in biochar was markedly reduced by increasing carrier gas flow rate, and the type of feedstock also influenced the PAH content. However, there was no clear dependence of pyrolysis temperature on PAH concentrations, which was attributed to PAHs being increasingly formed and evaporated at higher pyrolysis temperatures. Ultimately, condensation of pyrolysis vapours and deposition on biochar was identified as the main risk for biochar contamination with PAHs, as this resulted in elevated concentrations of high-risk, higher molecular weight PAHs. Weaknesses in the pyrolysis unit design, such as cold zones, resulted in elevated concentrations of VOCs, as well as PAHs, in biochar. Comparing concentrations and phytotoxic potential of both compound groups, it was concluded that observed toxic effects were much more likely caused by VOCs in biochars containing both contaminants. Overall, formation of VOCs and PAHs cannot be prevented, but their presence in biochar resulting from retention and deposition can be minimised.

Identiferoai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:735684
Date January 2016
CreatorsBuss, Wolfram
ContributorsMasek, Ondrej ; Graham, Margaret
PublisherUniversity of Edinburgh
Source SetsEthos UK
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation
Sourcehttp://hdl.handle.net/1842/25526

Page generated in 0.0017 seconds