Heat transfer and friction data were obtained for air flow through seven commercial pipes with equivalent sand roughness ratios varying from 0.020 to 0.00041 in the Reynolds number range 10,000 - 80,000. Heat transfer for a given power loss decreased with increasing roughness ratio except at very high power losses, where this trend was to some extent reversed. The results for the Karbate pipe were somewhat out of line with those for standard pipes. This is attributed to a difference in the nature of the Karbate roughness.
In the plots of friction factor and j[subscript H] versus Reynolds number, the experimental data show that j[subscript H] continues to decrease with Reynolds number when friction factor has become constant for a rough pipe. This fact contradicts not only Reynolds' simple turbulence analogy and Colburn's modification thereof, which are in other respects inapplicable, but is also at odds with the more rigorous analogy of Taylor and Prandtl and the similar, semi-empirical equation of Pinkel. It is, however, in agreement with the Karman analogy, which also gives a good absolute prediction of the heat transfer data. / Applied Science, Faculty of / Chemical and Biological Engineering, Department of / Graduate
| Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/40549 |
| Date | January 1955 |
| Creators | Smith, James Wilmer |
| Publisher | University of British Columbia |
| Source Sets | University of British Columbia |
| Language | English |
| Detected Language | English |
| Type | Text, Thesis/Dissertation |
| Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0009 seconds