Return to search

Vliv tloušťky vzorku na iniciaci trhliny z vrcholu obecného singulárního koncentrátoru napětí / The Influence of Specimen Thickness on Crack Initiation in the Tip of General Singular Stress Concentrator

Geometrical discontinuities, like sharp notches, appear in constructions and engineering structures and lead to stress concentrations. These technical objects are very dangerous due to the fact that they reduce the structural conformity and can lead to crack initiation. Technical objects are not always designed as homogenous bodies but can consist of two or more materials with sharp notches on the interface of these materials. The influence of free surface on crack initiation conditions is studied and assessed by means of 3D model of sharp and bi-material notches with finite thickness. Stress fields around the singular stress concentrators are calculated with finite element method and the results are evaluated by means of criterion of critical quantity. This approach is easy applicable and can be used in combination with the knowledge of basic material properties and results of finite element analysis of the assessed notches. In order to estimate weather crack will initiate from the middle of the observed notched specimen or from its free surface, the value of averaged critical applied stress was introduced. With this value it’s possible to determine the location of crack initiation thru the sample thickness. Thru the ratio of values of critical applied stress in the middle and on the free surface of the observed specimen it’s possible to quantify the influence of the free surface on the location of crack initiation. With the use of this approach it’s shown, that the location of crack initiation depends on more parameters, loading direction, the notch opening angle and the sample thickness. In case of bi-material notches it depends also on the ratio of young modulus.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:454852
Date January 2021
CreatorsKopp, Dalibor
ContributorsŘoutil,, Ladislav, Malíková, Lucie, Klusák, Jan
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/doctoralThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.002 seconds