Brewer's spent grain (BSG) is the major byproduct generated by the brewing industry, which contains 14–30% protein and 50–70% of fiber. Currently, BSG is predominantly used as low-value cattle feed or buried in landfills, which is a considerable loss of valuable resources, leading to economic loss and environmental problems. Although research has been done on BSG valorization, the studies are limited to producing a single product (e.g., polyphenols, ethanol, or active carbon) and without further utilization of the produced products. Besides, the economic information available about the production of value-added products from BSG is insufficient. The overall goal of this research is to develop an integrated process to convert BSG into value-added protein-rich feedstuff and cellulose absorbent. The objectives of the research detailed here were to 1) develop a process to simultaneously produce protein-rich (PP) and fiber-rich products (FP) from BSG, 2) assess the replacement of fishmeal with PP in shrimp feed, 3) evaluate the economics of the overall process of PP production at a commercial scale, and 4) explore the potential use of cellulose adsorbent obtained from the FP in removing heavy metals from contaminated water.
To attain these objectives, BSG was first subjected to a wet fractionation process to produce PP and FP using different chemical/biological treatments, where the effects of sodium hydroxide, sodium bisulfite, and a protease (Alcalase) at different concentrations were investigated. Under the optimized conditions, the produced PP contained 46% protein and less than 1% fiber. The effectiveness of using PP to replace fishmeal at increasing levels (10–70%) was then evaluated by performing shrimp feeding trials. The results showed that up to 50% of fishmeal in shrimp feed can be replaced by PP without affecting shrimp growth and feed utilization. Moving forward, a techno-economic analysis was conducted to evaluate the economic feasibility of the production of PP. The experimental conditions and results were input into the process simulation model for determining the mass and energy flows. For a processing plant with a capacity of 590 t wet BSG per day, the minimum selling price of PP to achieve a 5% return was determined to be $1044/t, lower than the price of fishmeal, indicating that the use of PP to replace fishmeal in shrimp feed could potentially reduce shrimp farming cost. The utilization of FP will further improve the economic feasibility of the fractionation process. FP was sequentially treated by dilute acid, alkali, and bleach to produce purified cellulose fibers, which were then modified by 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) oxidation to produce a cellulose adsorbent. The feasibility of the adsorbent in removing heavy metals (especially lead and manganese) from contaminated water was then investigated. Based on the results, the produced cellulose adsorbent showed high adsorption capacities for lead (272.5 mg/g) and manganese (52.9 mg/g). Overall, this study demonstrated that BSG can be upcycled into multiple value-added products via an integrated process. The outcomes of this study not only provide a low-cost and sustainable protein source to the aquaculture industry, and provide a novel adsorbent for the water treatment industry, but also offer alternative ways for the brewing industry to manage BSG. / Doctor of Philosophy / Brewer's spent grain (BSG) is the major byproduct generated by the brewing industry. Currently, BSG is predominantly used as low-value cattle feed or buried in landfills due to its high fiber and low protein contents, which is a considerable loss of valuable resources. Besides, raw BSG contains other nutrients and high water content, the inappropriate management of BSG may introduce environmental concerns. Though technologies have been investigated to valorize BSG by extracting protein from it, the process scaled-up is limited by the high drying costs of wet BSG, heavy chemical consumptions, and a large amount of fiber residue. The overall goal of this research is to develop an integrated process to convert BSG into value-added protein-rich feedstuff and cellulose absorbent.
In this study, we developed and optimized a process to produce protein and fiber products from wet BSG. The protein content of the produced protein product was doubled and the fiber content was reduced significantly compared with the raw BSG, which lighted the use of the protein product as an alternative to fishmeal. Fishmeal is an expensive aquafeed ingredient, the aquaculture industry is looking for alternatives to replace it. Herein, we investigated the effectiveness of the protein product as an alternative to fishmeal by conducting shrimp trials. A further economic analysis was conducted to evaluate the economic feasibility of the proposed process for protein and fiber production from BSG. In addition, the fiber product was used for producing a cellulose adsorbent to remove heavy metals from contaminated water.
Overall, this study demonstrated that BSG can be upcycled into multiple value-added products via an integrated process. The outcomes of this study not only provide a low-cost and sustainable protein source to the aquaculture industry, and provide a novel adsorbent for the water treatment industry, but also provide alternative ways for the brewing industry to manage BSG.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/114084 |
| Date | 16 September 2021 |
| Creators | He, Yanhong |
| Contributors | Food Science and Technology, Huang, Haibo, Fernandez-Fraguas, Cristina, Kuhn, David D., Ogejo, Jactone Arogo, O'Keefe, Sean F. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Dissertation |
| Format | ETD, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0025 seconds