This diploma thesis is an introduction to the ductile fracture under large plastic deformations and is focused to numerical simulation of this type of problems. Explicit finite element method (FEM) is discussed in theoretical introduction as the most powerful tool for numerical calculations in this area. Actual state of research and possibilities of ductile fracture simulations are presented. Applicable fracture criteria are collected in a summary sheet and the most important ones are selected and commented in detail. The problem of implementation of selected criteria into commercial FEM packages is discussed, too. Main part of the work is presented in chapters 7÷9 where two ductile fracture criteria (Equivalent Fracture Strain and Johnson-Cook) are applied to numerical simulation of material cutting. All results were obtained with ABAQUS/Explicit 6.5.1 and their verification was realized by experimental measurement.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:227954 |
| Date | January 2008 |
| Creators | Hůlka, Jiří |
| Contributors | Houfek, Lubomír, Petruška, Jindřich |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0024 seconds