<p>Flexible printed circuit boards (flex PCBs) are used in a wide range of electronic devices today due to their light weight, bendability, extensive wiring possibilities, and low-cost manufacturing techniques. The general trend in the flex PCB industry is further miniaturization alongside increasing functionality per device and reduced costs. To meet these demands, a new generation of low cost manufacturing technologies is being developed to enable structures with smaller lateral dimensions and higher packing densities.</p><p>Wet etching is today the most cost-efficient method for producing a large number of through-foil structures in flex PCBs. However, conventional wet etch techniques do not allow for through-foil structures with aspect ratios over 1 – a fact that either necessitates thin and mechanically weak foils or puts severe limitations on the packing density. The fabrication techniques presented in this thesis allow for through-foil structures with higher aspect ratios and packing densities using wet etching. To achieve high aspect ratios with wet etching, the flex PCB foils are pre-treated with irradiation by swift heavy ions. Each ion that passes through the foil leaves a track of damaged material which can be subsequently etched to form highly vertical pores. By using conventional flex PCB process techniques on the porous foils, high aspect ratio metallized through-foil structures are demonstrated.</p><p>The resulting structures consist of multiple sub-micrometer sized wires. These structures are superior to their conventional counterparts when it comes to their higher aspect ratios, higher possible packing densities and low metallic cross-section. Furthermore, metallized through-foil structures with larger areas and more complicated geometries are possible without losing the mechanical stability of the foil. This in turn enables applications that are not possible using conventional techniques and structures. In this thesis, two such applications are demonstrated: flex PCB vertical thermopile sensors and substrate integrated waveguides for use in millimeter wave applications.</p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:uu-8565 |
| Date | January 2008 |
| Creators | Yousef, Hanna |
| Publisher | Uppsala University, Department of Engineering Sciences, Uppsala : Acta Universitatis Upsaliensis |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, comprehensive summary, text |
| Relation | Digital Comprehensive Summaries of Uppsala Dissertations from the Faculty of Science and Technology, 1651-6214 ; 407 |
Page generated in 0.0015 seconds