The attention for materials displaying high magnetocaloric effect (MCE) has grown during the past 30 years. One of the most important properties of MCE is the adiabatic temperature change ( ). The main aim of this work was to develop a method to measure the temperature change ( ) for magnetocaloric materials in a changing magnetic field. A technique was developed where maximum reached for Gadolinium was 1.19 K in a changing magnetic field of 1.3 T, however, this is lower value in comparison with previous studies (3.3 K in a changing magnetic field of 1 T, Bjørk, et al., 2010) which makes the developed method not sufficient enough to measure . Furthermore, finding novel materials displaying high MCE is of great interest. MnFePSiB alloys display promising MCE properties but processing method is expensive and time consuming. Therefore, a MnFePSiB compound was simply remelted several times and heat treated to enhance its properties. The MnFePSiB alloy was remelted 1, 2 and 3 times after initial casting. Melting the material 3 times resulted improvement in both the magnetic and magnetocaloric properties due to enhanced homogeneity. The material melted 3 times was further heat treated to improve its magnetic magnetocaloric properties. Heat treating the material for 5 hours at 1373K improved the magnetic entropy change more than 10 times compared to the as cast sample, was moved closer to room temperature and maximum of 0.71 K was obtained.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:ltu-62614 |
| Date | January 2017 |
| Creators | Strandqvist, Nanny |
| Publisher | Luleå tekniska universitet, Materialvetenskap |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0018 seconds