The aim of this work is experimental evaluation of suitability of lubricants for drawing of stainless steel 1.4301 at elevated temperature, which corresponds to temperature in real process. The lubricant testing method is based on friction modeling between the pull edge and the retainer, which corresponds to the real process. Therefore, the design of the test fixture also conformed to this model. The result of the work is a comparison of the suitability of every single lubricants with the reference lubricant used in ACO Industries. The best results were obtained with AT Kalorex 650 S lubricant, which contains environmentally harmful additives.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:400946 |
| Date | January 2019 |
| Creators | Hřebíček, Pavel |
| Contributors | Staněk, Vojtěch, Lidmila, Zdeněk |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds