This project is concerned with the issue of the thickness optimalization of the wall thickness of the plascics headlamp housing by the simulation Moldflow analyse. There are mentioned the basic information about the plastic materials and their dividing over there. Furthermore the description of the injection process, the injection machines and the tools is included. The principles of the proposal and the construction of the plastics part is also mentioned here. In the application of the Moldflow Plastics Insight 6.0 there is provided the simulation of the melt moldflow for the proposed headlamp housing. Based on this analyse the proposal of the thickness reduction of the wall thickness of the headlamp housing is worked out with the aspect on the required qualities. It also contains the technoeconomic estimation of the benefit optimalization.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229141 |
| Date | January 2010 |
| Creators | Prokeš, Radim |
| Contributors | Tomaj, Martin, Kandus, Bohumil |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds