Return to search

Automated Method For Fiber Length Measurement

The price of cotton is dictated by quality and the most significant factor of contributing to the fiber quality is the length distribution of the fibers contained within the population. Therefore it is of importance to accurately and repeatably measure the length of fibers within a population so that it is graded properly. Current methods are inadequate and thus prior work focused on designing a machine to directly measure individual cotton fibers using digital imaging. The current work begins with the evaluation of the effectiveness of the digital imaging machine. The machine was evaluated and sources of error identified. Modifications were implemented in an attempt to improve the error. After multiple modifications with little success an entirely new design was conceptualized. The new design aimed to eliminate all major sources of error with the existing machine while not creating new sources of error. The new design is discussed and the results are compared to those obtained by the original imaging machine. The new machine was better able to accurately measure the length of cut length fibers. The variation between fibers within a sample and entire samples of cut length fiber was significantly decreased when compared to the variation of the previous system.

Identiferoai:union.ndltd.org:NCSU/oai:NCSU:etd-05222006-130435
Date04 August 2006
CreatorsTompkins, Michael
ContributorsDr. Jon Rust, Dr. M.K. Ramasubramanian, Dr. Jeffrey Joines, Dr. Gregory Buckner
PublisherNCSU
Source SetsNorth Carolina State University
LanguageEnglish
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://www.lib.ncsu.edu/theses/available/etd-05222006-130435/
Rightsunrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report.

Page generated in 0.0016 seconds