<p>Micro-electro-mechanical-systems (MEMS) comprise a range of technologies that enable the fabrication of micron-sized, solid state devices such as sensors and actuators. MEMS manufacturing technologies enable the development of many exciting micro-scale or micro miniaturized products. This paper presents a decision model for evaluating the potential cost/benefit of different applications of MEMS for textiles. The objective is to determine the feasibility of replacing current warp tension measurement methods with MEMS. In order to accomplish this goal, a literature survey was conducted to document the current economic models and cost justification issues as well as the fundamentals of MEMS. From this survey, decision methodologies were identified and a decision model was established. To establish this model, Microsoft Excel (version Excel 2000) spreadsheet was used as a tool. The results from this model have been used to analyze the feasibility of using MEMS technology in measuring warp tension for textile applications.Finally, conclusions and recommendations for future applications have been covered.<P>
| Identifer | oai:union.ndltd.org:NCSU/oai:NCSU:etd-20011219-112140 |
| Date | 02 January 2002 |
| Creators | Kobaner, Can |
| Contributors | Dr. George L. Hodge, Dr. Abdelfattah Seyam, Dr. William Oxenham, Dr. Thomas Honeycutt |
| Publisher | NCSU |
| Source Sets | North Carolina State University |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://www.lib.ncsu.edu/theses/available/etd-20011219-112140 |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0019 seconds