The process of electrospinning was utilized to fabricate randomly aigned nylon6 nanofibers and aligned nylon6 nanofibers. Polymer concentration affecting electrospinning was investigated. This parameter was evaluated using degree of crystallinity by differential scanning calorimetry (DSC) as well as visual images produced by scanning electron microscopy (SEM). DSC data demonstrated that more crystals were formed with lower polymer concentrations; SEM images revealed that slimmer fibers were produced by lower concentrations. The mechanical properties of unoriented fibers and aligned fibers were tested on Instron 5544. The result of tensile tests indicated higher Youngâs modulus and tensile strength of aligned nanofibers than that of unaligned fibers. The SEM images at broken edges of fibers illustrated different broken mechanisms of these two forms of nanofibers. The broken mechanism of aligned nanofibers was further confirmed by crystallinity parameters obtained from DSC and fiber diameter shown from SEM images.
| Identifer | oai:union.ndltd.org:NCSU/oai:NCSU:etd-07102009-165411 |
| Date | 13 August 2009 |
| Creators | Zhang, Shu |
| Contributors | Xiangwu Zhang, Russell Gorga, Alan Tonelli, Wendy Krause |
| Publisher | NCSU |
| Source Sets | North Carolina State University |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://www.lib.ncsu.edu/theses/available/etd-07102009-165411/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dis sertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0019 seconds