Return to search

The wetting of a titania surface : surface charge and thin liquid films

The hydrophobicity of a titania surface was increased by adsorption of octadecyltrihydrosilane (OTHS). The modified titania surface was characterised using a number of techniques: tapping mode AFM, streaming potential, X-Ray photoelectron spectroscopy and contact angle measurements. With a partial surface coverage of OTHS, a bell-shaped dependence of contact angle with respect to pH was observed, with the maximum advancing contact angle occurring at the point of zero charge of the titanium dioxide substrate. The contact angle change was also influenced by the surface coverage and salt concentration. At extreme pH values there was no further decrease in the contact angle, i.e. saturation occurred. A thermodynamic model was used to describe the influence of surface charge on the contact angle. The results were interpreted as a reduction in the solid-liquid interfacial free energy. The model described the results well until the point where saturation occurred.

Identiferoai:union.ndltd.org:ADTP/202052
Date January 2008
CreatorsHanly, Gary
Source SetsAustraliasian Digital Theses Program
LanguageEN-AUS
Detected LanguageEnglish
RightsCopyright Gary Hanly 2008

Page generated in 0.0013 seconds