The thesis is focused on the determination of the thermal conductivity coefficient on the group of thermoplastics used for 3D printing (PLA, ABS, PETG). The thesis describes the materials used for 3D printing and the design of air conditioning for the grocery store. A stationary method was used for the solution. The heat flux passing through the sample was measured and the thermal conductivity coefficient was calculated. By the chosen method, we determined the coefficient is = 0,11-0,13 W/(m·K). Comparison with the available results of other methods and authors has shown that the resulting coefficient is lower. Based on the data, it is possible to compare the thermal properties of 3D printing materials.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:392068 |
Date | January 2019 |
Creators | Běťák, Karel |
Contributors | Rubinová, Olga, Uher, Pavel |
Publisher | Vysoké učení technické v Brně. Fakulta stavební |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.001 seconds