High Spectral Resolution Lidar (HSRL) is a backscatter lidar technique that employs an optical/spectral filter to distinguish between particulate (Mie) and molecular (Rayleigh) backscattered light. By separating the two types of returns, higher accuracy measurements are possible that will enable improved climate models, air quality measurements, and climate forecasting. A spaceborne HSRL instrument can provide great impact in these areas by enabling near-continuous measurements across the Earth, however the optical filter technology has typically been too complex for reliable long-duration space flight due to the need for complicated and costly electro-optic feedback loops, extra alignment detectors, and additional laser sources. Furthermore, these complexities limit the filter from use in other applications. In this research, a high-performance, ultra-narrowband interferometric optical filter with a specific thermo-optical behavior has been designed and built. The interferometer has been designed such that it can be reliably adjusted/tuned by simply monitoring and adjusting the temperature. The greatly reduced operational complexity was made possible through high-accuracy thermal characterization of the interferometer materials, combined with detailed Structural-Thermal-Optical-Performance (STOP) modeling to capture the complicated interactions between the materials. The overall design process, fabrication procedures, and characterization of the optical filter are presented. / Doctor of Philosophy / LiDAR (an acronym for Light Detection and Ranging) is a technology that can be used to measure properties of the atmosphere. It is similar to radar, but uses much smaller light waves rather than larger radio waves, enabling more detailed information to be obtained. High Spectral Resolution Lidar (HSRL) is a lidar technique that uses a high precision optical filter to distinguish between light that scatters from particulates (such as dust, smoke, or fog) and light that scatters from molecules (such as oxygen, nitrogen, or carbon dioxide) in the atmosphere. By separating the two types of backscattered light, higher accuracy measurements are possible that will enable improvements in climate models, air quality measurements, and climate forecasting. A spaceborne HSRL instrument can provide great impact in these areas by enabling near-continuous measurements across the Earth; however, the optical filter technology has typically been too complex for reliable long-duration spaceflight due to the need for complicated and expensive additional hardware. In this research, a high-performance HSRL optical filter that can be reliably operated by simply monitoring and adjusting the temperature has been designed, built, and tested. The greatly-reduced operational complexity has been made possible through a new process that enables more accurate prediction of the complicated interactions between the materials of the optical filter. This process is based on a combination of high-accuracy characterization of the materials and detailed structural-thermal-optical-performance (STOP) modeling. The overall design process, fabrication procedures, and characterization of the optical filter are presented.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/90799 |
| Date | 01 July 2019 |
| Creators | Seaman, Shane Thomas |
| Contributors | Materials Science and Engineering, Heflin, James R., Pickrell, Gary R., Suchicital, Carlos T. A., Hostetler, Chris A. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Dissertation |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0025 seconds