Return to search

Thermal Property Measurement of Thin Fibers by Complementary Methods

To improve measurement reliability and repeatability and resolve the orders of magnitude discrepancy between the two different measurements (via reduced model transient electrothermal and lock-in IR thermography), this dissertation details the development of three complementary methods to accurately measure the thermal properties of the natural and synthetic Nephila (N.) clavipes spider dragline fibers. The thermal conductivity and diffusivity of the dragline silk of the N. clavipes spider has been characterized by one research group to be 151-416 W m−1 K −1 and 6.4-12.3 ×10−5 m2 s −1 , respectively, for samples with low to high strains (zero to 19.7%). Thermal diffusivity of the dragline silk of a different spider species, Araneus diadematus, has been determined by another research group as 2 ×10−7 m2 s −1 for un-stretched silk. This dissertation seeks to resolve this discrepancy by three complementary methods. The methods detailed are the transient electrothermal technique (in both reduced and full model versions), the 3ω method (for both current and voltage sources), and the non-contact, photothermal, quantum-dot spectral shape-based fluorescence thermometry method. These methods were also validated with electrically conductive and non-conductive fibers. The resulting thermal conductivity of the dragline silk is 1.2 W m−1 K −1 , the thermal diffusivity is 6 ×10−7 m2 s −1 , and the volumetric heat capacity is 2000 kJ m−3 K −1 , with an uncertainty of about 12% for each property

Identiferoai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-5737
Date01 May 2016
CreatorsMunro, Troy Robert
PublisherDigitalCommons@USU
Source SetsUtah State University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceAll Graduate Theses and Dissertations
RightsCopyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact digitalcommons@usu.edu.

Page generated in 0.0022 seconds