Return to search

A Thermal Energy Storage Tank Model for Solar Heating

The results of a combined theoretical and experimental study of the kinetics of a hot-liquid energy-storage tank are presented. A physical model is developed which accurately describes the thermal stratification behavior in a storage tank. The governing differential equations are developed for the physical model. A numerical solution to the system of equations is presented. Some existing models were examined and the predicted results of each are discussed. The concepts developed can be used to predict the thermal stratification behavior in a storage tank under most conceivable operating conditions. These conditions include flow configurations at the top and the bottom of the tank which both have inversionary tendencies. Inversionary behavior could conceivably occur in both the top and the bottom regions of the tank during a combined storage and usage mode which might occur at non-peak storage hours. Although the work was done primarily for the utilization of solar energy, the results are not limited to such application. The results are more significant as a contribution to applied fluid dynamics.

Identiferoai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-8416
Date01 May 1977
CreatorsPate, Robert Arthur
PublisherDigitalCommons@USU
Source SetsUtah State University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceAll Graduate Theses and Dissertations
RightsCopyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact digitalcommons@usu.edu.

Page generated in 0.0015 seconds