Thermal nanoimprint lithography (T-NIL) is a cheap and fast technique to produce nanopatterns in polymeric materials. It creates these patterns by pressing a stamp down into a polymer film that has been heated above its glass transition temperature. These nanopatterned polymer films can be used in a wide variety of scientific fields, not the least the organic semiconductor industry. There the nanopatterned films have, among else, been used to improve the efficiency of organic light-emitting diodes (OLEDs). The light-emitting electrochemical cell (LEC), which is similar in structure to an OLED, also uses polymer films in their device structure but the light emitting layer also contains an electrolyte. However, it has not been shown if nanopatterns can improve LECs as well or if it is even possible to make an imprint in their polymer films that are mixed with an electrolyte. This thesis shows that T-NIL can be used to imprint nanopatterns in films made of poly(ethylene oxide) and the conjugated polymer Super Yellow. The best nanopatterns were produced by setting the imprint parameters to 85 °C, 10 bar, 1800 s for poly(ethylene oxide) and 115 °C, 20 bar, 1800 s for Super Yellow. Imprints were also performed on polystyrene but no nanopatterns could be produced. This was most likely because the stamp could not handle the high temperature that is required to make a nanopattern in polystyrene. The best imprint parameters of Super Yellow were then used to produce a pattern in a film made of Super Yellow mixed with the salt tetrahexylammonium tetrafluoroborate (THABF4) in order to be able to produce one imprinted and one reference LEC. The imprinted LEC had a luminosity of 139 cd/m2, an improvement of 20% compared to the reference’s 115 cd/m2 when operated under identical conditions. The forward direction and the angular dependent electroluminescence spectrum of the imprinted LEC clearly showed an effect not observed in the reference. These findings show that the polymer films used in a LEC can be imprinted with a nanopattern by using T-NIL. The imprinted films can be used to create functional LECs that show different behavior and a higher luminosity compared to a non-imprinted reference. If these results can be repeated it might be the starting point of a brighter future.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:umu-149396 |
| Date | January 2018 |
| Creators | Moberg, Thomas |
| Publisher | Umeå universitet, Institutionen för fysik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0026 seconds