The diploma thesis is focused on calculating the thermal resistance of the line light source and the design of the cooling system with ideal inlet temperature. The partial aim of the work is in cooperation with CAMEA spol. s r. o. to determine the thermal resistances of the individual parts of the device and propose modifications so that the total thermal resistance and the maximum temperature are within the limits given by the cooperating firm. The main objective is to design a cooling system with all safety features and recommended regulation for economical and reliable operation. Analytical calculations, CFD simulations and real-world testing are used to determine the desired results. A reduction by 30% in thermal resistance of the printed circuit board was achieved, the thermal resistance of the aluminum profile with the cooling channel was determined and its hydraulic properties were calculated. The current cooling system designed by CAMEA spol. s r. o. for less powerful diodes was verified for use in a more powerful system, and a new cooling system was designed for efficient and economical operation in a powerful diode system.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:378498 |
| Date | January 2018 |
| Creators | Tulis, Vojtěch |
| Contributors | Tuhovčák, Ján, Hejčík, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds