Experiments at the University of Maryland Plasma Physics Laboratory have discovered an unusual temperature response in the form of a "thermal wave" which begins at the center and propagates towards the surface of a zinc oxide sample, when heated in a microwave cavity without the presence of oxygen. This effect is believed to be caused by the irregular temperature dependence of the dielectric properties of zinc oxide, particularly dielectric loss. Two thermocouple probes were used to measure the temperature response in a small cylindrical sample of zinc oxide packed in powder insulation, and heated in a microwave oven. In order to determine if the unusual response is caused by the dielectric properties, this work uses a finite-difference mathematical model to simulate the experiments, both for the case of zinc oxide heated in ordinary air, as well as for the case of zinc oxide heated in nitrogen. A revised version of the model is used to determine if the thermocouple probe has any effect on the temperature of the sample. The spatial and temporal temperature distribution results from the model indicate that the thermocouple probe has a negligible effect on the results and that the "thermal wave" can be attributed to the irregular temperature dependence of the dielectric loss of the material. / Master of Science
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/36596 |
Date | 08 May 1997 |
Creators | Fischer, Patrick |
Contributors | Mechanical Engineering, Thomas, James R. Jr., Scott, Elaine P., Diller, Thomas E. |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Detected Language | English |
Type | Thesis |
Format | application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Relation | etd.pdf |
Page generated in 0.001 seconds