Return to search

Measurements of thermal properties for composite materials

Thèse ou mémoire avec insertion d'articles. / Ce mémoire de maitrise présente les résultats de la diffusivité thermique de matériaux composites et le calcul de la température pyrométrique d'une plaque d'acier et d'un matériau composite. L'introduction donne les enjeux et objectifs du travail ainsi qu'un bref survol du corps du mémoire. Le chapitre 2 présente le premier article scientifique intitulé "Thermal Diffusivity Measurements With Flash Method at Different Depths In a Burned Composite Material". On mesure dans ce chapitre la diffusivité thermique à la température de la pièce de matériaux composites avant et après attaque d'une flamme d'un brûleur au propane. Les diffusivités thermiques obtenues varient entre 1.23e-07 m²/s à 3.14e-07 m²/s pour le premier échantillon de composite et entre 2.10e-07 m²/s et 3.14e-07 m²/s pour d'autres échantillons. On y présente également dans l'annexe A la diffusivité thermique en fonction de la profondeur d'un échantillon de composite brûlé pendant 15 secondes. Dans la partie brûlée de l'échantillon, on observe une convergence de la diffusivité thermique vers sa valeur initiale de 4.25 e-07 m²/s, lorsque non brûlée. Cette convergence en fonction de la profondeur suit une tendance polynomiale d'ordre 2. Le chapitre 3 présente le deuxième article scientifique intitulé "Temperature Calculation of a Steel Plate under Kerosene Flame Attack Using Two-Color Pyrometry". On mesure la température d'une plaque d'acier à l'aide d'une caméra infrarouge contenant deux filtres "transparents à la flamme" à 3 800 nm et 3 950 nm. Ces mesures avec la caméra infrarouge sont non-intrusives. Les températures pyrométriques calculées atteignent 600°C en régime permanent et sont en concordance avec des thermocouples préalablement incrustés dans la plaque. L'annexe B donne la température pyrométrique pour un échantillon de composite. La conclusion générale revient sur les points saillants des différents chapitres et donne une perspective pour de futurs travaux. / This master's thesis presents the results of the thermal diffusivity of composite materials and the calculation of the pyrometric temperature of a steel plate and a composite material. The introduction gives the challenges and objectives of the work as well as a brief overview of the body of the dissertation. Chapter 2 presents the first scientific article entitled "Thermal Diffusivity Measurements With Flash Method at Different Depths In a Burned Composite Material". In this chapter, we measure the thermal diffusivity at room temperature of composite materials before and after attack by a flame from a propane burner. The thermal diffusivities obtained vary between 1.23e-07 m²/s to 3.14e-07m²/s for the first sample of composite and between 2.10e-07 m²/s and 3.14e-07 m²/s for other samples. The Annex A also presents the thermal diffusivity as a function of the depth of a sample of composite burnt for 15 seconds. In the burnt part of the sample, we observe a convergence of thermal diffusivity towards its initial value of 4.25 e-07 m²/s when unburned. This convergence as a function of depth follows a polynomial trend of order 2. Chapter 3 presents the second scientific article entitled "Temperature Calculation of a Steel Plate under Kerosene Flame Attack Using Two-Color Pyrometry". The temperature of a steel plate is measured without touching the material using an infrared camera containing two "flame-transparent" filters at 3 800 nm and 3 950 nm. The calculated pyrometric temperatures reach 600°C in steady state and agree with thermocouples previously embedded in the plate. Annex B gives the pyrometric temperature for a composite sample. The conclusion returns to the salient points of the different chapters and gives a perspective for future work.

Identiferoai:union.ndltd.org:LAVAL/oai:corpus.ulaval.ca:20.500.11794/121683
Date28 July 2023
CreatorsGnessougou, Serge-Olivier Adam
ContributorsDe Champlain, Alain, Maldague, Xavier
Source SetsUniversité Laval
LanguageFrench
Detected LanguageFrench
TypeCOAR1_1::Texte::Thèse::Mémoire de maîtrise
Format1 ressource en ligne (xi, 40 pages), application/pdf
Rightshttp://purl.org/coar/access_right/c_abf2

Page generated in 0.0037 seconds