During the past two decades, Quality of Supply has become a serious problem for Variable Speed
Drives in the industrial and commercial sectors. Quality of Supply problems can trip Variable Speed
Drives, which results in loss of production, which is a significant problem in the paper and pulp
industry. Researchers have proposed that Quality of Supply problems can be minimised in-house,
using controlled front end rectifiers (boost rectifier), to maintain a regulated DC link voltage in the
Variable Speed Drive configuration, as most faults are created by a varying supply voltage.
This thesis extends the work performed on boost rectifiers by investigating the feasibility of replacing
the classical controllers with a Continual Online Trained Artificial Neural Network current controller.
The approach adopted in this thesis was to evaluate and extend the work previously performed on
conventional boost rectifier current controllers and Continual Online Trained Artificial Neural
Network current controlled inverter, at the University of Natal. During this evaluation, the
respective controller shortcomings were identified and addressed. Thereafter the Continual Online
Trained Artificial Neural Network current controller was modified, according to the control
requirements of the boost rectifier, and used as a replacement for the conventional current controller
in the boost rectifier system. Finally, the Continual Online Trained Artificial Neural Network current
controller was evaluated to assess its viability as a current controller for a boost rectifier.
The concept of implementing the real-time Continual Online Trained Artificial Neural Network
current controller using a DSP (Digital Signal Processor) was described, along with the main features
and practical limitations of existing commercial DSP's. It is shown that at the time of writing of this
thesis, the commercially available DSP' s are not powerful enough to implement the Continual Online
Trained Artificial Neural Network current controller. However this thesis also shows that it is
feasible to implement the real-time controller on the newly released TMS320C67 DSP card. / Thesis (M.Sc.Eng.)-University of Natal, Durban, 2000.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:ukzn/oai:http://researchspace.ukzn.ac.za:10413/5317 |
| Date | January 2000 |
| Creators | Worthmann, Cedric Alwyn. |
| Contributors | Diana, G. |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0019 seconds