The microelectronics industry requires continuous advances due to ever-evolving technology and the corresponding need for higher density substrates with smaller features. Specifically, new dielectric materials with enhanced electrical properties are needed. At the same time, adhesion must be maintained in order to preserve package reliability and mechanical performance. As a result, this research investigates the use of thin glass sheets as an alternative substrate material as it offers a number of advantages including coefficient of thermal expansion similar to silicon, good dielectric properties and optical transparency to assist in the alignment of buried features. As part of this project it was necessary to deposit metallic coatings onto the glass sheets to create electrical tracks, pads and microvias. In order to meet these requirements, the metallisation of both smooth as received glass surfaces and surfaces roughened by laser machining using electroless copper and nickel deposition were investigated. This study resulted in a number of important conclusions about the roles of chemical bonding and mechanical anchoring in both the adhesion and catalyst adsorption, that are key factors in the electroless metallisation process.....
Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:510295 |
Date | January 2009 |
Creators | Cui, Xiaoyun |
Publisher | Loughborough University |
Source Sets | Ethos UK |
Detected Language | English |
Type | Electronic Thesis or Dissertation |
Source | https://dspace.lboro.ac.uk/2134/10303 |
Page generated in 0.0613 seconds