In this study, InSe and CdS thin films were deposited by thermal evaporation method onto glass substrates. Schottky and heterojunction devices were fabricated by deposition of InSe and CdS thin films onto SnO2 coated glass substrates with various top metal contacts such as Ag, Au, In, Al and C. The structural, electrical and optical properties of the films were investigated prior to characterization of the fabricated devices.
The structural properties of the deposited InSe and CdS thin films were examined through SEM and EDXA analysis. XRD and electrical measurements have indicated that undoped InSe thin films deposited on cold substrates were amorphous with p-type conductivity lying in the range of 10-4-10-5 (& / #61527 / .cm)-1 at room temperature. Cd doping and post-depositional annealing effect on the samples were investigated and it was observed that annealing at 100 oC did not show any significant effect on the film properties, whereas the conductivity of the samples increased as the Cd content increases. Temperature dependent I-V and Hall effect measurements have shown that conductivity and carrier concentration increases with increasing absolute temperature while mobility is almost temperature independent in the studied temperature range of 100-430 K.
The structural and electrical analysis on the as-grown CdS thin films have shown that the films were polycrystalline with n-type conductivity. Temperature dependent conductivity and Hall effect measurements have indicated that conductivity, mobility and carrier concentrations increases with increasing temperature. Transmission measurements on the as-grown InSe and CdS films revealed optical band gaps around 1.74 and 2.36 eV, respectively.
Schottky diode structures in the form of TO/p-InSe/Metal were fabricated with a contact area of around 8x10-3 cm2 and characterized. The best rectifying devices obtained with Ag contacts while diodes with Au contacts have shown slight rectification. The ideality factor and barrier height of the best rectifying structure were determined to be 2.0 and 0.7 eV, respectively. Illuminated I-V measurements revealed open-circuit voltages around 300 mV with short circuit current 3.2x10-7 A. High series resistance effect was observed for the structure which was found to be around 588 & / #61527 / . Validity of SCLC mechanism for Schottky structures was also investigated and it was found that the mechanism was related with the bulk of InSe itself.
Heterostructures were obtained in the form of TO/n-CdS/p-InSe/Metal and the devices with Au and C contacts have shown the best photovoltaic response with open circuit voltage around 400 mV and short circuit current 4.9x10-8 A. The ideality factor of the cells was found to be around 2.5. High series resistance effect was also observed for the heterojunction devices and the fill factors were determined to be around 0.4 which explains low efficiencies observed for the devices.
Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/3/12605431/index.pdf |
Date | 01 September 2004 |
Creators | Yilmaz, Koray |
Contributors | Parlak, Mehmet |
Publisher | METU |
Source Sets | Middle East Technical Univ. |
Language | English |
Detected Language | English |
Type | Ph.D. Thesis |
Format | text/pdf |
Rights | To liberate the content for public access |
Page generated in 0.001 seconds