Porous silicon dioxide thin films were produced via dip-coating and doped with Ag+ by adding AgNO3 to the dipping solution. Nanoparticles were formed within the pores of these films by UV exposure. Nanoparticle formation was confirmed by UV-visible spectroscopy and Transmission Electron Microscopy (TEM). Conductive Atomic Force Microscopy (CAFM) showed that the conductivity of the films decreased upon exposure to UV. This decrease in the conductivity is most likely due to the clustering of charge carriers. Initially, Ag+ ions are attached to negatively charged pore walls in a dense packing network. Upon UV exposure (125 mW @ 266 nm), the Ag+ ions are reduced to Ag metal and agglomerate to form clusters. The agglomeration creates gaps in the film that decrease its conductivity. This ability to tune film conductivity was used to create insulating patterns within conducting films. A calibration mask was placed over the films during UV exposure, and exposed regions with a minimum width of ~2 μm were detected as depressions with insulating behavior. The fabrication of photonic and plasmonic devices is being explored using this method.
| Identifer | oai:union.ndltd.org:vcu.edu/oai:scholarscompass.vcu.edu:etd-1014 |
| Date | 01 January 2009 |
| Creators | Caperton, Ricky |
| Publisher | VCU Scholars Compass |
| Source Sets | Virginia Commonwealth University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
| Rights | © The Author |
Page generated in 0.0019 seconds