Return to search

Modelování silových účinků působících na dopravní a manipulační zařízení s cílem jejich optimalizace / Modelling of Load Impacts Acting on Transport and Handling Equipments with the Aim of their Optimization

This PhD thesis deals with employment of the state of the art methods of mathematical optimization and structural analysis in the field of load carrying steel structures of handling devices. The goal of the thesis is to compile a methodology which enables generating of optimal dimensions of conceptually designed load carrying parts of handling devices. The proposed methodology is composed of sub-methods which are successively applied to find an optimal configuration of structure according to a chosen criterion. The methodology incorporates sub-methods such as Design of Experiments, parametric finite-element modelling, the state of the art computational methods for stability assessment, mathematical approximation methods and state of the art optimization schemes based of both, heuristic and gradient principle. Recommendations from Eurocode 3 are used to introduce imperfections to the finite element model in order to perform the nonlinear buckling analysis. The practical part of this thesis is focused on optimization of welded beams. The principle of the methodology is in detail explained and demonstrated on an example of lifting spreader beam of load carrying capacity of 20 tons. The proposed methodology is practically realized by an algorithm created in Matlab software. Matlab is also utilized to implement some sub-methods including mathematical optimization schemes. Both, gradient and heuristic optimization algorithms are used for comparison and mutual verification. Structural analysis is performed by means of parametrical finite-element models which are built in the Ansys Parametric Design Language (APDL). The methodology takes into account buckling, which is inherent to thin walled structures under compressive load. The buckling analysis is performed by means of both, linear and non-linear procedures in Ansys. The output of the algorithm is an optimized configuration of the structure, which minimizes the objective function and complies with all requirements implemented in the form of design constraints.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:234422
Date January 2015
CreatorsŠťastný, Antonín
ContributorsHrabovský, Leopold, Kuľka,, Jozef, Škopán, Miroslav
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/doctoralThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0021 seconds