Return to search

On the deflection of s32003 stainless steel beams

Presented in this work are the results of twelve flexural tests conducted on small-scale coupons to establish the load-deflection behavior of UNS S32003 (ATI 2003®) hot-rolled duplex stainless steel flat plates. All specimens were tested as simply supported beams loaded at the midspan. Test specimens had nominal width and thickness of 1 in. and 0.25 in., respectively. Four different span lengths of 4 in., 6 in., 9 in., and 12 in. were investigated. Analysis of the results showed that the non-linear deflection behavior can be estimated reasonably well by adopting the conventional deflection equation pertaining to an assumed linear elastic material, but after replacing the modulus of elasticity with a secant modulus corresponding to the maximum tension strain resulting from the applied load.

Identiferoai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/54918
Date27 May 2016
CreatorsSaid, Eman
ContributorsZureick, Abdul-Hamid
PublisherGeorgia Institute of Technology
Source SetsGeorgia Tech Electronic Thesis and Dissertation Archive
Languageen_US
Detected LanguageEnglish
TypeThesis
Formatapplication/pdf

Page generated in 0.0017 seconds