The objective of this research was to further understand the behavior of the soil under the action of a tillage tool, with the purpose of finding a relation between the tool geometry and the resultant soil seed bed. Thus the problem consisted of understanding the mechanics of producing soil break up and to find a logical method of analyzing it. / The problem was solved using fundamental principles of soil mechanics and force equilibrium analyzis. As a result, a mathematical model was developed which describes three failure zones within the cut soil volume. The model can be programmed into a computer to generate maps of normal and shear stresses to visualize the three failure zones. / The failure zones are the shear failure zone, the tensile fracturing zone and the no failure zone. The tensile fracturing zone is delimited by the tensile stress reaching the tensile strength of the soil at the given soil moisture content and soil density. The tensile strength of the soil was measured using an apparatus and method designed in this research. / The mathematical model gives an explanation of the mechanics of crumbling and the shape of the failed volume, but it does not give information concerning soil aggregate quality and arrangement within the soil furrow. Then, a method of analyzing the formed aggregates was developed which considers some soil physical properties of aggregates. / The study concluded that the smaller tool width and the smaller tool rake angle, among the ones used in this research, produced the most efficient geometry in producing the largest amount of soil break up, the most uniform aggregate formation and the most stable aggregate arrangement. The same tool geometry requires less energy per unit volume of soil disturbed. The best performance is produced at the lowest soil water content among those tested.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.38205 |
| Date | January 2001 |
| Creators | Ibarra, Sandra. |
| Contributors | McKyes, E. (advisor) |
| Publisher | McGill University |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Format | application/pdf |
| Coverage | Doctor of Philosophy (Department of Agricultural and Biosystems Engineering.) |
| Rights | All items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated. |
| Relation | alephsysno: 001872757, proquestno: NQ78701, Theses scanned by UMI/ProQuest. |
Page generated in 0.0103 seconds